Zheflon®FL2008 PVDF - Injection Grade|Suitable For Injection Molded Processed Products, Such As Valve, Pump, Lining, PV Film
Zheflon®FL2008 PVDF - Injection Grade|Suitable For Injection Molded Processed Products, Such As Valve, Pump, Lining, PV Film
Zheflon®FL2008 PVDF - Injection Grade|Suitable For Injection Molded Processed Products, Such As Valve, Pump, Lining, PV Film
Zheflon®FL2008 PVDF - Injection Grade|Suitable For Injection Molded Processed Products, Such As Valve, Pump, Lining, PV Film
Model
FL2008

Item specifics

Water Absorption(%)
≤0.15
Melt Flow Rate(g/10min)
15.0-30.0
Secondary Melting Point(℃)
165-180
Break Strength/mPa
≥25

Review

Description

Description
Zheflon®FL2008 PVDF homopolymer is low viscosity grade that with high purity.

Important properties include excellent chemical resistance to most aggressive substances and solvents, excellent mechanical strength and toughness, high abrasion resistance, high temperature capabilities, excellent aging resistance, low permeability to most gases and liquids and easily melt-processed by standard methods of injection.

This product is suitable for injection moulded processed products.
Technical Specifications
FL2008 SpecificationsRangeReference Standard
Water Absorption(%)≤0.15GB/T 6284
Melt Flow Rate(g/10min)15.0-30.0Load 5kg,230℃,GB/T 3682
Secondary Melting Point(℃)165-180GB/T 19466
Break Strength/mPa≥25GB/T 1040
Elongation at Break/%≥5GB/T 1040
Yield Strength/mPa≥40GB/T 1040
Elongation at Yield/%≥5GB/T 1040
Whiteness≥35GB/T 2913
Yellowness≤15HG/T 3862