FKM Precompound
FKM Precompound

FKM Precompound

Model
FLC Precompound

Item specifics

Features
Narrow molecular weight distribution
Forms
White or light-yellow flake
Uses
O-ring,Shaft seals, gaskets, extruded shapes

Review

Description

Product Specification
Process safety instructions
Packaging and storage

General

Features

               Medium molecular weight distribution

Uses

Shaft seals, gaskets,O ring, extruded shapes, molded tubing

Forms

White or light-yellow flake

Items

Typical Value

Test Method

FLC-20

FLC-40

Physical Properties

Fluorine Content（mass%）

66


66

 

Density（g/cc）

1.78~1.84


1.78~1.84

ASTM D297

Mooney Viscosity

20~30


40-50

ASTM D1646 ML 1+10 at 121°C

Water content

0.15


0.15

ASTM D 5668

Solubility

Soluble in lower ketones and esters

 

Vulcanization Properties

T10（s）

<80


<100

ASTM D5289

T90（s）

<150


<270

ASTM D5289

Mechanical Properties

Tensile strength（MPa）

16.0


16.5

ASTM D412 Method A

100% Modulus

5.0


5.0

ASTM D412 Method A

Elongation at Break（%）

210


190

ASTM D412 Method A

Tearing Strength（KN/m）

21


21

ASTM D624

Hardness, Shore A

76


76

ASTM D2240, Type A

Compression Set

16


16

ASTM D395, Test B 70 hours at 200℃

Air-oven aging

ISO 188 After Dry Heat Aging;70 hours at 230℃

Tensile strength change rate（%）

-10


-10

ASTM D412 Method A

Elongation at Break change rate（%）

-8


-8

ASTM D412 Method A

Hardness change, Shore A

-1


-1

ASTM D2240, Type A 

 


1)Store and use all fluoroelastomers only in a well-ventilated area.

2)Do not smoke in areas contaminated with dust from fluoroelastomers.

3)Avoid eye contact. After handling fluoroelastomers wash any skin that came in contact with the product with soap and water.

4)Potential hazards, including evolution of toxic vapors, exist during compounding or processing under high temperatures. 

5)Before processing the fluoroelastomers, read and consult the MSDS, and follow all label directions and operation cautions.. 

1)Fluoroelastomers be packed in PVC bags in the shape of rubber film, each bag weight 5KGS, and finally be put into a carton. Each carton contains 5 bags with net weight 25KGS.

2)It must be stored in a clean, cool, and dry place. The storage life is one year from the date of production. It must be re-inspected if over one year and only can use if qualified.

3)It is transported as non-dangerous chemicals. Avoid excessive vibration and far away from pollution, sunshine and water during the transport.

recommend

Flurine® FKM Precompound

Flurine® FKM Precompound

Model : FLC Precompound

Flurine®Middle Mooney Fluoroelastomer

Flurine®Middle Mooney Fluoroelastomer

Model : FLC Precompound

Flurine® Wide molecular weight distribution Fluoroelastomer

Flurine® Wide molecular weight distribution Fluoroelastomer

Model : FLC Precompound

Flurine® Low Mooney Fluoroelastomer FKM

Flurine® Low Mooney Fluoroelastomer FKM

Model : FLC Precompound

Flurine® High Mooney Fluoroelastomer

Flurine® High Mooney Fluoroelastomer

Model : FLC Precompound

Flurine® High Fluorine content H series Fluoroelastomer FKM

Flurine® High Fluorine content H series Fluoroelastomer FKM

Model : FLC Precompound

Flurine® M series fluoroelastomer

Flurine® M series fluoroelastomer

Model : FLC Precompound

Flurine® Low Temperature Fluoroelastomer FKM

Flurine® Low Temperature Fluoroelastomer FKM

Model : FLC Precompound

Flurine® C Series Fluoroelastomer

Flurine® C Series Fluoroelastomer

Model : FLC Precompound

Flurine® Peroxide-cured Fluoroelastomer- PC series FKM

Flurine® Peroxide-cured Fluoroelastomer- PC series FKM

Model : FLC Precompound

KeyWords