Zheflon® FL E201 Water-based Coating Grade PVDF
Zheflon® FL E201 Water-based Coating Grade PVDF
Zheflon® FL E201 Water-based Coating Grade PVDF

Zheflon® FL E201 Water-based Coating Grade PVDF

Model
FL E201

Item specifics

General Features
Homopolymer, medium-high melt viscosity
Use
Water-based coatings
Forms
Milky white translucent aqueous dispersion

Review

Description

PVDF Characteristic
Process safety instructions
Packaging and storage

Zheflon® FL E201 polyvinylidene fluoride is an aqueous dispersion that is homopolymerized with a fluoromonomer and stabilized with a nonionic surfactant. It has the typical characteristics of thermoplastic fluororesin. Also it has excellent chemical stability, temperature resistance, corrosion resistance, weather resistance, good electrical insulation and low friction factor for most active substances and solvents.


General

Features

Homopolymer, medium-high melt viscosity

Uses

Water-based coatings

Forms

Milky white translucent aqueous dispersion

Physical Properties

Typical Value

Test Method

Density（g/cc）

1.290±0.030

——

Solid content（%）

55±5

——

Solid melting point（℃）

167±3

ASTM D3418

Surfactant content（%）

5～7

Based on PVDF weight

pH value

6～9

pH test paper











Ø Process safety instructions

1)    This product should be processed under 260℃ to avoid producing toxic gases.

2)    After touching the lotion or powder, wash any contacted skin with soapy water.

3)    During long-term storage, gently shake the container every month or slowly stir the emulsion 3-5 times to prevent precipitation.

4)    The operator should pay attention to personal protection during processing and use.


Ø Packaging and storage

It can be packaged according to customer requirements, stored in a clean, cool, dry place. Transported as Non-hazardous goods. 

Avoid freezing, heat, dampness or violent vibration during transportation.

KeyWords